Plasticstrends

  • Increase font size
  • Default font size
  • Decrease font size

News Flash

Singapore researchers touts corn starch can help solve body armour and protective sports padding

How blood can clot to heal a wound - Science reports

Siver nanowire electrodes for flexible electronics

Stanford researchers use cheap plastics film to make safe lithium batteries

UC Berkley researchers have developed paper thin e-skin that responds to touch

James Cropper Speciality Paper touts recycling of disposable coffee cups

Will your windows generate power one day?

New ambipolar polymer beats others: reports US researchers

US and South Korean researchers develop a printing technique to make high performance CNT transistors

Canadian researchers claim world’s most efficient “inverted” OPV solar cells

3D systems introduces non-halogenated flame retardant for aircraft applications

USA researchers report polymeric blood-resistant surgical glue that can repair minimally invasive heart defects

Scientists from Sweden and USA showed electronics can truly be organic or say truly be plastics

Harvard University researchers design stretchable, transparent ionic conductors

Polymer helps to designing higher capacity Li-ion battery

Advanced nanocomposite membrane technology of NanoH2O turns it to a Global clean technology company

Brazilian scientists are actively pursuing bioplastics research and innovation

A review on polymer/bioactive glass nanocomposites provides current trends in polymer research

Rutgers Univ researchers moves plastic electronics with graphene based PS thin films

Austrian scientists claim to be the first to have developed an image sensor that is fully transparent

UCLA scientists showed how simple it could be to make conducting polymer thin films

Univ of Texas @ Austin scientists reported method to produce a large scale reduced graphene oxide

Using biodegradable polymer, University of Basque country researcher report on bone regeneration

Work of North Carolina State Univ. researchers shows how to remove radioactive elements from drinking water

University of Texas at Austin researchers show use of polymer membranes for fracking in shale gas

Something old... Something new.... produces an interesting marriage

Bayer uses PC film Makrofol? for it's new Innosec Fusion? technology to stop counterfeiting

Plastics help design non-shatter pint glass to prevent pub attacks

Current status in graphene based polymer nanocomposites – a review

Oil-SAP, a novel development to clean-up oil spill & recovery from Penn State University, USA

Alberta scientists help to make Canada’s first bio-composite based electric vehicle body design

Japanese scientists report a unique, smart and self-healing polymer nanocomposite hydrogels

Are you an injection moulder, you may want to read the ultimate in mould cooling article

Arkema unveils a range of "green" polymers for its textile market

A new microcellular injection molding process for polycarbonate using water

Green Composites - all you wanted to know about

Plastic Logic sees mass production of flexible display in 2008

Umass, Amherst researchers find ways to hold 300 kilograms of weight using sticky tape

How computer modelling & 3D printing create fracture resistant composites – reports Stratasys and MIT researchers

Harvard Univ researchers show how soft robotics could navigate a difficult obstacle

Prof. Alan Heegers group demonstrated the potential of plastics solar cells

Braskem S.A. is leading the way to manufacture biobased polyethylene using catalytic dehydration

Researchers review how to characterize polymer nanocomposites by different microscopicy techniques

Caltech researchers show through telechelic polymers how to produce a safer and a cleaner fuel

Nanoparticle coating prevents ice build up

Block copolymers could create hard disks with 10 tera-bit-per-Square-inch:Researchers predict

Cima NanoTech flexes mussels with its non-Indium Tin Oxide, high performance transparent conductors

McMaster university (Canada) researchers developed flexible solar cell technology

It is time to make “Perfect Plastic” reports UK researchers

Japanese researchers are developing stereo-block type PLAs for high performance materials

Researchers develop unique printable thin film supercapacitor using SWCNT

Current trends and future prospects for flame retardants in polymeric materials

ZogglesTM earns Invention of the year 2010 award and keeps the fog away

Wax could be green too – touts GreenMantra Technolgies!

In Milan, art and science get together to showcase Vegetal, weather resistant designer chair

How Collagen nanofibers could find use in Tissue Engineering

Bio-succinic acid is becoming new green platform chemical for plastics

Non-toxic, liquid bandage from Chesson Labs of Durham, NC is ready for the healthcare market

Stanford university researchers detect mercury ions in sea water using organic polymer transistor sensor

For the first time, IBM researchers showed 3D molecular structure could be observed

US researchers develop shape memory polymer nanocomposites exhibiting fast actuation speed

How plastics helping revolutionize stretchable electronics applications – a review, not to be missed!

Polymers can be used to package insulin into a pill for diabetes treatment reports Indian scientists

Scientists from IBM and Stanford University are developing new plastics recycling process

Researchers show stretchy battery for flexible and stretchable electronics

Electric Glue: Another twist to make controlled polymer-surface adhesion

Researchers gather to discuss advances in organic photovoltaics (OPV)

Practical Devices provide useful power from the body

Teijin Techno Products claims to be world’s first mass producer of aramid nanofibers

MIT researchers show how to draw Polyethylene as nanofibers and get a very high thermal conductivity

Can you “Cool Your Roof” - reports researchers from Chinese Academy of Sciences, Beijing

Stanford Univ researchers make Jell-O-like conducting polymer hydrogels

If you follow plastics electronics - follow Unidym’s innovative product lines

German researchers unveiled a green approach to electrospinning technique for making biodegradable nanofibres

Carbon3D, a Canadian company unveils a breakthrough technology for layerless 3D printing

Binder free multilayer graphene based polymer composite for high performance supercapacitor electrodes

Austrian researcher reports new opportunities from Silicon oxide Nanofilms

Can you “Cool Your Roof” - reports researchers from Chinese Academy of Sciences, Beijing

World’s first all-plastic LED lamp comes from Japan

GM recycles oil soaked booms from the Gulf of Mexico for its Chevrolet Volt under hood parts

Self-healing plastics healing like human skin

Innovations in design come from plastics to win several 2009 International Design Excellence Awards

Stratasys touts World’s first color multi-material 3D printer for rubber & plastics products

Rice Univ (USA) researchers grew high quality graphene from polystyrene, cookies, grass, cockroach leg & dog feces

MIT team aims to develop application specific surgical adhesives to seal tissues

Mannigton converts large stickers from 2010 winter games into commercial flooring

Chinese researchers made a bendy polymer that could separate aromatics hydrocarbons from aliphatic

NIST develops greener solution to challenge commercial fire retardants

Can polymer reinforced aerogel make a space mission? University of Akron researchers think so!

A team of researchers demonstrate plastics and graphene can work together to make touch screen device a reality

IKV researchers report thermoplastic/metal hybrid materials for Direct manufacturing electronic part

Are you interested in self-healing polymers – must read reviews

Work of North Carolina State Univ. researchers shows how to remove radioactive elements from drinking water

MIT researchers develop first Solar Thermal Fuel storage platform in solid-state

Can polymer reinforced aerogel make a space mission? University of Akron researchers think so!

Battelle researchers are improving PLA for injection molding applications

Polymer bank notes on the rise to avoid counterfeit paper currencies

Plastrec, a Quebec recycler unveils recycled PET production combining two plastics technologies

USA researchers develop all-polymer multilayer coating to retard fire and to suppress smoke

Can Gas Jet process challenge electrospinning in producing polymeric nanofibers?

Yale scientists develop high performance thin film composite membrane

Norner touts major research project on polymers based on carbon dioxide

French scientists tout first use of nano-structured assemblies that could revolutionize dentistry

Polymers help Addidas to launch lightest soccer boots and 2010 FIFA World cup match ball never seen before in the field

Korean scientists provide a different twist to the “Smart Window” technology

A novel technique to manufacture continuous twisted yarn from aligned PAN nanofibers

Strain Paint: an alternative to strain gauges

Sabic Innovative Plastics unveils its newly developed a clear flame retardant Polycarbonate copolymer

Can you 3D print yourself? TwinKinds of Germany shows just that!

Swedish researchers show highest reported charge capacities for all polymer paper-based battery

AMI unveils the North American Bioplastics technology agenda

Princeton university researchers embedded piezoelectric material onto polymer as energy harvester

Wood Plastic Composite

E-mail Print PDF

ImageWood and plastic are best friends these days. They can be combined to give the aesthetics of wood with the added durability of plastic. Termed as wood/plastic composites - WPCs' are a relatively new family of thermoplastic composites based on wood-fibres and the commodity thermoplastics. The polymers used for WPCs' are the high volume, low cost, commodity thermoplastics - polyethylene, polypropylene and PVC.

How it all began

The use of wood fiber started a few years ago when Mobil undertook research efforts to find a way to recycle polyethylene grocery bags. Their team used recycled polyethylene (PE) and cellulose fibres, such as obtained from sawdust or newspaper, to make a composite that they formed into deck boards. The story did not end there. The group that developed this technology organized a management buyout in 1996 and formed Trex, a company based in Winchester, Virginia.

 

Major North American players

With funding from green fund sources and a superb marketing effort and a network of over 2700 lumberyards, Trex has built their company to the stage that in the year 2003 alone they sold over $200 million of WPCs' that went primarily into the decking market. Trex has lead the pack of companies that now manufacture WPCs', which are mainly sold in the construction market.

 

Other large US manufacturers of WPC decking are Timbertech owned by Crane (TimberTech), US Plastic Lumber (SmartDeck), AERT (ChoiceDeck) which is distributed by Weyerhaeuser, and Louisiana-Pacific (WeatherBest) who all use polyethylene; CertainTeed (Boardwalk), who uses PVC; and Correct Deck (CorrectDeck), who uses polypropylene.

 

In Canada, WPC decking manufacturers include Nexwood (Nexwood) in Brampton, Composite Building Products (Xtendex) in Barrie, and Brite Manufacturing (Life Long) in Bolton. These companies are three of the founding members of the Canadian Natural Composites Council (CNCC) that was formed in 2002/3 as the newest Council of the Canadian Plastics Industry Association (CPIA).

 

Processing of WPC and inherent challenges

The dominant manufacturing technology has been extrusion and this has been supplemented by injection moulding. The biggest challenge in processing WPCs' is that the cellulose fibre, whether it be wood fibre (pine or maple saw dust), recycled newsprint, hemp, sisal, kenaf, jute, flax or rice hulls, is removing the moisture and keeping the processing temperature below the decomposition temperature of the cellulose fibre being used. Wood, in its green condition contains 20% moisture. In its air-dried condition, wood contains about 12% moisture. To process wood fibre in extrusion processes, the moisture content must be below 0.5%. Another problem is that that when you dry wood to a very low moisture content, it is very hygroscopic and wants to add back the water that was removed. Therefore, once the wood fibre is dried, it should be used immediately so that it will not pick up moisture. Above 200°C (400°F), the wood fibre starts to decompose. This adversely affects the colour and the physical properties of the part being made.

 

For extrusion of WPCs', there are choices to be made. Wood fibre can be used directly with a twin-screw extruder to make a final part, or wood fibre can be used with a twin-screw extruder to make a wood fibre concentrate. The wood fibre concentrate can then be used in a single screw extruder to make the final part. Wood fibre concentrate can also be purchased from a compounder, such as Onaga Composites. There are other choices to be made. All wood is not the same. Which cellulose fibre to use? Wood fibre and rice hulls are common for decking products. With a wood fibre choice, there are still more selections to be made. Hardwood (oak or maple) or softwood (spruce, pine, fir) are the first choices. Mesh size of the wood fibre is next. 40, 60 and 100 meshes are common choices. Then there is the question of how much wood fibre to use in the finished part. Common choices range from 30% to 65%. Needless to say, there are quite some differences in processing this wide a range of filler loadings.

 

For injection molding, the only practical choice at this time is the use of wood fibre concentrate. The other choices, outlined in the extrusion section, still apply though.

 

And so, what physical properties are obtained from WPCs'? Again there is a difference between extrusion and injection molding. In extrusion, there is now first generation technology and second-generation technology. In injection molding, there is only first generation technology. What is first generation and second-generation technology? First generation technology refers to the simple processing of the WPC - that is, just extrusion or injection molding. Second generation technology involves orientation of the polymer molecule after it has been formed into a shape by the extrusion process. This orientation process, similar to die drawing in metal forming technology, increases the strength and stiffness of the WPC. It can also lower the density.

 

With first generation technology, as one increases the wood fibre content, the strength of the WPC decreases and the stiffness (modulus) increases. While with second-generation technology, the initial strength and stiffness of the polymer is increased six-fold and four-fold respectively. When wood fibre is added, the strength and stiffness are both lowered, but from a much higher level. If a die-drawing process is used for orientation instead of a ram-extrusion process, the wood fibres and the polymer pull apart giving a composite of a much lower density. Typical numbers are a density of 1.0 g/cc for a ram-extruded 30% wood fibre/oriented polypropylene in contrast to a density of 0.5 g/cc for a die-drawn 30% wood fibre/oriented polypropylene composite, both with a draw ratio of about 10. This orientation technology is not available to injection molding at this time. Some developmental work has also been using rotational moulding.

 

The future

Exciting new applications, combination of wood/plastic properties and rapid growth are fueling the WPCs market. The decking market has been the first one to be addressed in a major fashion. Other construction market applications are now coming to the fore. Railing to go with the decking has been the next for most companies. Some players have pursued window and door profiles. The fencing market, which is quite large, is seeing a major effort as several companies commercialize new systems. The $8 billion North American siding market is seeing its first prototype products now. This should be available commercially in the next couple of years. Other construction markets where products will soon emerge include shingles and roofing tiles. For WPCs, the field is wide open.

 

Frank Maine

Frank Maine, PSA Composites Inc., 40 Taggart Street, Units 3 & 4, Guelph, Ontario N1H 6H8 Canada

Dr. Maine is an organic chemist with a B.Sc. and an M.Sc. in Engineering Chemistry from Queen's University and a Ph.D. in organic chemistry from Cambridge University. He held various positions in government laboratories and in industry in various areas of plastics engineering. He was Manager of Research and Development at Fiberglas Canada.

Dr. Maine is actively involved in the commercialization of oriented plastics. Currently, he is the Chairman of PSA Composites Inc. and is working with a group of companies that are developing and commercializing oriented thermoplastic and composite products including woodfibre/plastic composites. He has given numerous presentations and is often sought speaker in WPC technology.

Previously, he was the Member of Parliament (Canada) for the Guelph riding of Wellington from 1974 to 1979.

Frank Maine recently published an update for this article. Please click here.