Plasticstrends

  • Increase font size
  • Default font size
  • Decrease font size

News Flash

Researchers show stretchy battery for flexible and stretchable electronics

Braskem S.A. is leading the way to manufacture biobased polyethylene using catalytic dehydration

How Collagen nanofibers could find use in Tissue Engineering

Wax could be green too – touts GreenMantra Technolgies!

Univ of Texas @ Austin scientists reported method to produce a large scale reduced graphene oxide

Singapore researchers touts corn starch can help solve body armour and protective sports padding

Scientists from Sweden and USA showed electronics can truly be organic or say truly be plastics

Block copolymers could create hard disks with 10 tera-bit-per-Square-inch:Researchers predict

How computer modelling & 3D printing create fracture resistant composites – reports Stratasys and MIT researchers

Strain Paint: an alternative to strain gauges

James Cropper Speciality Paper touts recycling of disposable coffee cups

Stanford university researchers detect mercury ions in sea water using organic polymer transistor sensor

Plastrec, a Quebec recycler unveils recycled PET production combining two plastics technologies

GM recycles oil soaked booms from the Gulf of Mexico for its Chevrolet Volt under hood parts

Work of North Carolina State Univ. researchers shows how to remove radioactive elements from drinking water

A novel technique to manufacture continuous twisted yarn from aligned PAN nanofibers

Will your windows generate power one day?

Current status in graphene based polymer nanocomposites – a review

Mannigton converts large stickers from 2010 winter games into commercial flooring

Caltech researchers show through telechelic polymers how to produce a safer and a cleaner fuel

Yale scientists develop high performance thin film composite membrane

Umass, Amherst researchers find ways to hold 300 kilograms of weight using sticky tape

Stratasys touts World’s first color multi-material 3D printer for rubber & plastics products

Kyoto researchers are upbeat about cellulose nanofibers based composites for auto parts

UC Berkley researchers have developed paper thin e-skin that responds to touch

Advanced nanocomposite membrane technology of NanoH2O turns it to a Global clean technology company

Binder free multilayer graphene based polymer composite for high performance supercapacitor electrodes

Scientists from IBM and Stanford University are developing new plastics recycling process

Polymers can be used to package insulin into a pill for diabetes treatment reports Indian scientists

Work of North Carolina State Univ. researchers shows how to remove radioactive elements from drinking water

Self-healing plastics healing like human skin

Brazilian scientists are actively pursuing bioplastics research and innovation

It is time to make “Perfect Plastic” reports UK researchers

Austrian scientists claim to be the first to have developed an image sensor that is fully transparent

ZogglesTM earns Invention of the year 2010 award and keeps the fog away

Using biodegradable polymer, University of Basque country researcher report on bone regeneration

Can polycarbonate be replaced with another polymer? Click chemistry might provide the answer!

German researchers unveiled a green approach to electrospinning technique for making biodegradable nanofibres

If you follow plastics electronics - follow Unidym’s innovative product lines

Alberta scientists help to make Canada’s first bio-composite based electric vehicle body design

A new microcellular injection molding process for polycarbonate using water

Stanford researchers use cheap plastics film to make safe lithium batteries

Something old... Something new.... produces an interesting marriage

Carbon3D, a Canadian company unveils a breakthrough technology for layerless 3D printing

A review on polymer/bioactive glass nanocomposites provides current trends in polymer research

For the first time, IBM researchers showed 3D molecular structure could be observed

Plastic Logic sees mass production of flexible display in 2008

USA researchers report polymeric blood-resistant surgical glue that can repair minimally invasive heart defects

A team of researchers demonstrate plastics and graphene can work together to make touch screen device a reality

Prof. Alan Heegers group demonstrated the potential of plastics solar cells

Cima NanoTech flexes mussels with its non-Indium Tin Oxide, high performance transparent conductors

Bayer uses PC film Makrofol? for it's new Innosec Fusion? technology to stop counterfeiting

Can polymer reinforced aerogel make a space mission? University of Akron researchers think so!

McMaster university (Canada) researchers developed flexible solar cell technology

Practical Devices provide useful power from the body

Are you interested in self-healing polymers – must read reviews

Can you 3D print yourself? TwinKinds of Germany shows just that!

Can polymer reinforced aerogel make a space mission? University of Akron researchers think so!

Rutgers Univ researchers moves plastic electronics with graphene based PS thin films

Harvard Univ researchers show how soft robotics could navigate a difficult obstacle

US and South Korean researchers develop a printing technique to make high performance CNT transistors

How plastics helping revolutionize stretchable electronics applications – a review, not to be missed!

Bio-succinic acid is becoming new green platform chemical for plastics

US researchers develop shape memory polymer nanocomposites exhibiting fast actuation speed

Are you an injection moulder, you may want to read the ultimate in mould cooling article

French scientists tout first use of nano-structured assemblies that could revolutionize dentistry

MIT researchers develop first Solar Thermal Fuel storage platform in solid-state

Current trends and future prospects for flame retardants in polymeric materials

NIST develops greener solution to challenge commercial fire retardants

Arkema unveils a range of "green" polymers for its textile market

New ambipolar polymer beats others: reports US researchers

University of Texas at Austin researchers show use of polymer membranes for fracking in shale gas

Researchers gather to discuss advances in organic photovoltaics (OPV)

Polymer helps to designing higher capacity Li-ion battery

Japanese researchers are developing stereo-block type PLAs for high performance materials

Non-toxic, liquid bandage from Chesson Labs of Durham, NC is ready for the healthcare market

MIT researchers show how to draw Polyethylene as nanofibers and get a very high thermal conductivity

Stanford Univ researchers make Jell-O-like conducting polymer hydrogels

Princeton university researchers embedded piezoelectric material onto polymer as energy harvester

In Milan, art and science get together to showcase Vegetal, weather resistant designer chair

USA researchers develop all-polymer multilayer coating to retard fire and to suppress smoke

MIT team aims to develop application specific surgical adhesives to seal tissues

Researchers develop unique printable thin film supercapacitor using SWCNT

Polymer bank notes on the rise to avoid counterfeit paper currencies

Canadian researchers claim world’s most efficient “inverted” OPV solar cells

Can you “Cool Your Roof” - reports researchers from Chinese Academy of Sciences, Beijing

Oil-SAP, a novel development to clean-up oil spill & recovery from Penn State University, USA

Sabic Innovative Plastics unveils its newly developed a clear flame retardant Polycarbonate copolymer

Harvard University researchers design stretchable, transparent ionic conductors

Teijin Techno Products claims to be world’s first mass producer of aramid nanofibers

IKV researchers report thermoplastic/metal hybrid materials for Direct manufacturing electronic part

Can Gas Jet process challenge electrospinning in producing polymeric nanofibers?

Nanoparticle coating prevents ice build up

Battelle researchers are improving PLA for injection molding applications

World’s first all-plastic LED lamp comes from Japan

Plastics help design non-shatter pint glass to prevent pub attacks

Electric Glue: Another twist to make controlled polymer-surface adhesion

MIT researchers develop first Solar Thermal Fuel storage platform in solid-state

Rice Univ (USA) researchers grew high quality graphene from polystyrene, cookies, grass, cockroach leg & dog feces

Japanese scientists report a unique, smart and self-healing polymer nanocomposite hydrogels

Can you “Cool Your Roof” - reports researchers from Chinese Academy of Sciences, Beijing

Swedish researchers show highest reported charge capacities for all polymer paper-based battery

Green Composites - all you wanted to know about

3D systems introduces non-halogenated flame retardant for aircraft applications

Norner touts major research project on polymers based on carbon dioxide

Siver nanowire electrodes for flexible electronics

AMI unveils the North American Bioplastics technology agenda

Chinese researchers made a bendy polymer that could separate aromatics hydrocarbons from aliphatic

UCLA scientists showed how simple it could be to make conducting polymer thin films

Innovations in design come from plastics to win several 2009 International Design Excellence Awards

Polymers help Addidas to launch lightest soccer boots and 2010 FIFA World cup match ball never seen before in the field

Researchers review how to characterize polymer nanocomposites by different microscopicy techniques

How blood can clot to heal a wound - Science reports

Austrian researcher reports new opportunities from Silicon oxide Nanofilms

Korean scientists provide a different twist to the “Smart Window” technology

21st Century Advanced Plastic Additive Solutions to Watch [Part 1]

E-mail Print PDF

encapsulated_flavours Additives are crucial to plastics formulations. Specialty additives are one of the most dynamic segments of the plastics industry. A specialty additive insight that occurs suddenly and unexpectedly is a flash of inspiration. Knowledge or insight gained by looking into the future of polymer formulation is helpful. A sudden burst of insight about the future will produce a new and radically different way of using advanced plastic additive solutions that will open up hidden product development opportunities. Let’s tour eight key polymer additive segments and explore sixteen trends of the future!

Additives for Packaging

Fragrance and Flavor Packaging Enhancement

ScentSational Technologies, which develops/licenses olfaction packaging technologies, has introduced CompelAroma which uses ‘Encapsulated Aroma Release’ technology to add particularly engineered food grade flavors to a plastic packaging structure to enhance a product‘s aroma profile. For example, CompelAroma contained in package walls or liners can appreciably extend the period of time that a package such as coffee remains on the shelf by maintaining a desirable aroma. ScentSational has also created technology to incorporate fragrance and flavor in single serve beverage container closures/closure liners designed to be consumed directly from the bottle. The technology allows the beverage bottle headspace to be filled with aromas that provide a greater consumer experience. ScentSational technology is also being used to add fragrance to the closures of shampoo, laundry detergents, and other cleaning, health and beauty products to allow consumers to sample a product's scent, without disturbing the product seal.


Packaging Film Advanced Slip and Antiblock Additives

Slip and antiblock additives are widely used to modify the surface of polymer film and sheet to facilitate performance in fabrication, packaging, and/or end-use applications. Without their use most film would be hard to process, as the material would otherwise not slide readily over itself or other surfaces in converting, packaging, and printing equipment. Film layers have a tendency to adhere when pressed together during processing or on being stacked after cutting. A range of slip and antiblock additives are available including primary, secondary, non-migratory, and other slips, in addition to organic and inorganic antiblocks, and diverse slip–antiblock combinations. In many applications such as single and multilayer bags, wrap and other packaging these additives must have the appropriate food contact approvals. While often added directly by the resin producer, slip and antiblocks are most commonly added by the processor via a range of masterbatches to adapt additive levels to the application.
Biopolymers provide new market prospects for packaging additives such as slips and antiblocking materials. Many of the emerging biopolymers are particularly tacky and tend to stick to themselves and to metal take-up rolls and other surfaces involved in processing. A critical factor for PLA (polylactic acid) additives is compatibility with the resin to maintain clarity. Furthermore some companies like Metabolix and Meredian say they will only use biobased additives with their resins. Clariant Masterbatches has developed new CESA-slip and CESA-block masterbatches for biopolymers like PLA employed by the packaging and film industry. Its CESA-naturslip additives, based on pure naturally occurring waxes such as beeswax, have minimal impact on transparency and give very good slip properties with a coefficient of friction (CoF) close to that achieved by modern synthetic waxes.

clariant_fig2

Sukano slip/antiblock masterbatches for PLA film and sheet (dc S511) include optical brighteners. They have food contact certification and are also approved as suitable for composting. Additionally PolyOne’s OnCap Bio additive masterbatches include slip and antiblock masterbatches designed for specific use with biodegradable resins such as PLA. Ampacet Corporation is another masterbatch provider that has developed slip and antiblock concentrates for PLA and PHA.

Biobased Solutions

Renewably Sourced PET

The world’s first global bio-PET integrated supply chain is being established by Toyota Tsusho. The supply chain includes procurement of bio-ethanol, production of bio-mono ethylene glycol (bio-MEG), PET tolling, and bio-PET marketing. Braskem will supply the bio-ethanol from Brazil. Greencol Taiwan Corp (GTC), a 50/50 JV between Toyota Tsusho and China Man-Made Fiber Corporation, will produce bio-MEG using the sugar-based ethanol as feedstock. Greencol will produce the bio-MEG in a new facility in Kaohsiung, Taiwan. The bio-MEG will be handled/ supplied by Toyota Tsusho to PET toll manufacturers in Asia. The off-take of bio-PET from toll manufacturers will be marketed by Toyota Tsusho to end-users in Japan, Europe and the US. The companies expect to toll-produce and sell 200,000 tons/year of bio-PET.

bio_pet_figure3

Global Bio-PET Supply Chain; [Source: Toyota Tsusho]


Non-Food Sourced High Performance Bioplastic

A durable new high performance bioplastic developed by NEC is suitable for plastic components for electronic equipment. This first-of-its kind durable new bioplastic is produced from stable non-edible plant resources. It is based on cellulose from plant stems and cardanol, a primary component of cashew nut shells. The plant stems and nut shells are abundant resources often discarded as byproducts of the agricultural processing industry. Use of these non-edible plant sources as the main components of the new bioplastic will therefore have little or no impact on the production of food crops. Cashew nuts are widely cultivated in India and Vietnam and NEC says it is assured of a stable supply of cardanol. The durable bioplastic boasts a high plant composition ratio of more than 70%. Other cellulose based plastics are typically heavily loaded with petroleum based plasticizers which results in a bioplastic with a low plant component ratio and poor durability including insufficient heat and water resistance or are blended with petroleum based plastics to improve strength and thermal resistance. Cardanol has a unique molecular structure that consists of a rigid phenol component and a flexible, hydrophobic, linear hydrocarbon component. Cellulose is the main ingredient of the bioplastic and is bonded with the oil-like cardanol which has been modified to enhance its reactivity.

cashew_nut_figure4Cellulose / Cardanol Based Bioplastic; [Source: NEC]

NEC’s new bioplastic has important advantages compared to PLA and cellulose acetate as follows:
•    Its molding time is <50% that of PLA and comparable to conventional cellulose-based and petroleum-based plastics
•    More than twice the heat resistance of PLA and 1.3 times that of cellulose acetate
•    Twice the strength of existing PLA and comparable strength to conventional cellulose acetate
•    Water resistance is comparable to PLA and approximately 3 times better than cellulose acetate


cardanol_figure5Cellulose / Cardanol Based Bioplastic (Green Bar) Performance Features; [Source: NEC]

 

NEC expects the new bioplastic to be commercialized by shortly at a price lower than PLA and competitive with petroleum based plastics. NEC believes the durability achieved by the new bioplastic will make it highly suitable for electronics applications.

Bioplastics Formulation

Open Source Strategy to Spur Injection Molded Bioplastics Development

A page is being taken from the computer industry to spur innovation and drive biopolymers more widely into injection molding applications. NatureWorks is making formulation and compounding procedures for its high-heat resistant, high impact, bioresin Ingeo 3801X openly available. The company has ‘drawn back the curtain’ on development of the grade to share the technology and provide transparency on how the solution was arrived at including what was used to tailor properties/processing characteristics and why. Information is also openly available for high heat formulation Ingeo HHIM 670-82-01. With formulation in hand, independent specialty resin companies and brand owners with captive operations will be in a position to use Ingeo as the foundation for biobased injection molded products and components. NatureWorks also expects the details of the formulation can serve as a basis for R&D in further tailoring biobased solutions for the semi-durable plastics market. The company has also taken a similar ‘pull-back-the-curtain’ approach with its foam grade material, 8051D, but as that grade had just a small group of potential users it was done on a more one-to-one basis. NatureWorks is now also offering for sale a range of polymer-grade lactides. Lactide partners can also take advantage of a new Ingeo licensee package. Under select terms, the company will supply access to trademarks and application patents needed to support and enable the wider adoption of Ingeo biopolymers.


ingeo_figure6

Ingeo Injection Molding Compound Formulation; [Source: NatureWorks]


Heat Resistant Plant Based PLA Molding Compound

Highly heat resistant PLA Molding compound MBA900H co-developed by Panasonic Electric Works and Teijin Ltd. is composed of 80% plant-based renewable feedstock. The compound has significantly reduced molding cycle time around half that of conventional PLA compounds. Conventional PLA has low heat resistance and limited injection-molding capability because of its longer molding cycle time. Other molding compounds have been developed by mixing PLA with petroleum based plastics but attaining the desired levels of heat resistance and moldability has required a high ratio of oil based plastic. In Teijin’s‘Biofront’ bioplastic, a highly heat resistant PLA is used in the compound. Teijin’s Biofront stereo-complex PLA has a melting point of approximately 210ºC, significantly higher than that of conventional PLA. It also shows better hydrolytic stability and achieves semi-crystallization in just 20-25% of the time required with conventional PLA. The stereo-complex PLA made with conventional ‘left handed’ poly-L-lactic acid combined with its ‘right-handed poly-D-lactic acid that has much higher heat resistance. 8Biofront PLA of 50/50 L and D lactides achieves a semicrystalline resin with a melting point 40ºC higher than conventional PLA, and on a par with the heat resistance of petroleum-based PBT. Panasonic Electric Works’ proprietary compound-design and production technologies were also used in the development. The compound will initially be used in the housings of cell phones and other mobile devices and digital consumer electronics. Panasonics’ initial goal is 1000 tons annual production. Teijin operates a Biofront demonstration plant with a capacity of 1000 tons/year and expects to increase its capacity to 5,000 tonnes/year.

panasonic_figure7

Comparison of Molding Cycle Time (Red, Biobased MBA900H); [Source: Panasonic Electric Works, PEW]


Formulations and Transparency

Solasorb Inorganic UV Light Absorber

Solasorb, a novel type of inorganic UV light absorber from Croda Polymer Additives is based on ultra fine metal oxides (TiO2 and ZnO) that provide stable dispersion, low migration, and long-term protection. In comparison to traditional nanoparticle additives, this UV protection material is said to deliver:
•    Low migration
•    Long-term UV protection
•    Greater dispersion
•    Minimal effect on transparency
Careful particle size control yields good UV absorbance coupled with significantly improved transparency compared to other metal oxide powders. Its use in plastics for packaging applications reduces color change in cosmetics and personal care products and prevents vitamin loss, development of off-tastes and odors in beverages.


croda_figure8


NanoArc ATO Infrared Protection

NanoArc Antimony Tin Oxide (ATO) nanoparticle additives by Nanophase Technologies Corporation can be incorporated into clear film and sheet to absorb IR but not visible light. It provides this benefit by absorbing energy in the near-IR region and reflecting energy at longer IR wavelengths, while maintaining excellent transparency in the visible region. In products like skylights it prevents heating of interior space. The incorporation of NanoArc ATO into surface coatings is an effective means of managing radiant heat without adversely impacting the optical clarity or other desirable physical properties of the article on which it is applied.


nanophase_figure9

To be continued ........

Donald V. Rosato, Ph.D.

Dr. Donald V. “Don” Rosato of PlastiSource Inc. has been actively involved with plastics, moving from aerospace development to leading resin suppliers from the late ‘60s to early ‘90s, before starting his own 20 year old prototype manufacturing, product development, and technical market advisory firm. He was involved with firsts developing the Apollo 11/12/13 composite moonship legs, America’s Cup/Olympic luge/bobsled parts, PET & recycled PVC bottle manufacturing, barrier packaging, super-tough nylons, engineered plastic blends/alloys, high performance LCPs & related ultra-resins, DARPA/ARPA aerospace/defense/alternative energy electronics, biocomposites/green resins, greenbuilding/LEED end uses, electrically/thermally conductive polymers, specialty additive compounds, TPEs/synthetic rubbers, advanced molding technologies, and clean thermoset resins. He continues into his 6th decade to author/present multiple global webinars, papers and books, analytical reports, and online plastic columns.

Don has wide-ranging technical and marketing plastic industry experience from product development, through production, to marketing, having worked for Northrop Grumman, Owens-Illinois/Graham, DuPont/Conoco, Celanese/Ticona, and Borg Warner/G.E. Plastics. He has developed numerous polymer related patents, participates in many trade groups (SPE, SPI, PIA, CPPIA, SAMPE), and is involved in these areas with PlastiSource, Inc. He earned his BS Chemistry, Boston College; MBA, Northeastern University; M.S. Plastics Engineering, University of Massachusetts Lowell; Ph.D. Business Administration, University of California, Berkeley, and has extensive executive management training.